Imodyuli yeCarmanhaas ephezulu yewelding equka iModyuli yeQBH, intloko yokuskena kunye neF-theta Scan lens. Sigxininise kwisicelo se-laser yemizi-mveliso ephezulu. Imodeli yethu eqhelekileyo yi-PSH14, PSH20 kunye ne-PSH30.
PSH14-H uhlobo lwamandla aphezulu-kumandla welaser ukusuka kwi-200W ukuya kwi-1KW(CW); ivalwe ngokupheleleyo intloko scan kunye nokupholisa amanzi; ilungele amandla elaser aphezulu, uthuli, okanye amathuba okucela umngeni kokusingqongileyo, umz. ukuvelisa okongeziweyo (ushicilelo lwe-3D), ukuwelda okuchanekileyo, njl.
PSH20-H uhlobo lwamandla aphezulu-kumandla welaser ukusuka kwi-300W ukuya kwi-3KW(CW); ivalwe ngokupheleleyo intloko scan kunye nokupholisa amanzi; ilungele amandla elaser aphezulu, uthuli, okanye amathuba okucela umngeni kokusingqongileyo, umz. ukuvelisa okongeziweyo (ushicilelo lwe-3D), ukuwelda okuchanekileyo, njl.
PSH30-H uhlobo lwamandla aphezulu-kumandla welaser ukusuka kwi-2KW ukuya kwi-6KW(CW); ivalwe ngokupheleleyo intloko scan kunye nokupholisa amanzi; ilungele amandla e-laser aphezulu kakhulu, amaxesha aphantsi kakhulu okukhukuliseka. Umzekelo welding laser.
Ukuwelda isigqubuthelo sebhetri yeeseli sisicelo esiqhelekileyo semodyuli ye-High Power welding, njengoko kunjalo ukuwelda imiphezulu yoqhagamshelwano yeseli eyenziwe nge-aluminiyam okanye iipleyiti zobhedu ukwenzela ukudibanisa ngombane iiseli nganye kwibhloko yebhetri. Imodyuli nayo iyisisombululo esifanelekileyo se-welding steel plates usebenzisa indlela "ye-welding ekude", efakwe kwi-axis gantries okanye iingalo zerobhothi. Ukongeza kwiyunithi ye-deflection ene-30 mm aperture, iiyunithi eziphambukayo ezine-20 mm aperture ziyafumaneka kwi-plastic welding.
1. Ukushisa okuphantsi kakhulu (≤3urad / ℃); Ngaphezulu kweeyure ze-8 zeXesha elide Offset Drift ≤30 urad
2. Isisombululo esiphezulu kakhulu kunye nokuphindaphinda; isisombululo≤ 1 urad; ukuphinda-phinda≤ 2 urad
3. Isantya esiphezulu kakhulu:
PSH14-H: 15m/s
PSH20-H: 12m/s
PSH30-H: 9m/s
| Umzekelo | PSH14-H | PSH20-H | PSH30-H |
| Igalelo lamandla elaser (MAX.) | CW: 1000W @ ifayibha laser I-Pulsed: 500W @ fiber laser | CW: 3000W @ ifayibha laser I-Pulsed: 1500W @ i-fiber laser | CW: 1000W @ ifayibha laser I-Pulsed: 150W @ fiber laser |
| Amanzi apholileyo/atywinwe intloko yokuskena | Ewe | Ewe | Ewe |
| Umngxuma (mm) | 14 | 20 | 30 |
| Esebenzayo Scan engile | ±10° | ±10° | ±10° |
| Imposiso yokuJonga umkhondo | 0.19 ms | 0.28ms | 0.45ms |
| Ixesha lokuPhendula ngeNyathelo(1% yesikali esipheleleyo) | ≤ 0.4 ms | ≤ 0.6 ms | ≤ 0.9 ms |
| Isantya esiqhelekileyo | |||
| Ukuma / ukutsiba | < 15 m/s | < 12 m/s | < 9 m/s |
| Ukuskena komgca / ukuskena kweraster | < 10 m/s | < 7 m/s | < 4 m/s |
| Ukuskena kwevektha eqhelekileyo | < 4 m/s | < 3 m/s | < 2 m/s |
| Umgangatho wokuBhala oLungileyo | 700 cps | 450 cps | 260 cps |
| Umgangatho wokubhala ophezulu | 550 cps | 320 cps | 180 cps |
| Ukuchaneka | |||
| Umgca | 99.9% | 99.9% | 99.9% |
| Isigqibo | ≤ 1 irad | ≤ 1 irad | ≤ 1 irad |
| Ukuphindaphinda | ≤ 2 irad | ≤ 2 irad | ≤ 2 irad |
| Ubushushu Ukuqhuba | |||
| I-Offset Drift | ≤ 3 urad/℃ | ≤ 3 urad/℃ | ≤ 3 urad/℃ |
| Qver 8hours Ixesha elide Offset Drift(Emva kwe-15min isilumkiso) | ≤ 30 irad | ≤ 30 irad | ≤ 30 irad |
| Uluhlu lobushushu obusebenzayo | 25℃±10℃ | 25℃±10℃ | 25℃±10℃ |
| Ujongano loMqondiso | I-Analog: ± 10V Idijithali: XY2-100 protocol | I-Analog: ± 10V Idijithali: XY2-100 protocol | I-Analog: ± 10V Idijithali: XY2-100 protocol |
| i-Input Power Requirement (DC) | ±15V@ 4A Max RMS | ±15V@ 4A Max RMS | ±15V@ 4A Max RMS |
Phawula:
(1) Zonke ii-engile zikwizidanga zoomatshini.
(2) Ngenjongo ye-F-Theta f=163mm. Ixabiso lesantya liyahluka ngokuhambelanayo kunye nobude bojoliso obahlukeneyo.
(3) Ifonti yestroke enye enobude obuyi-1mm.
