ICarmanhaas inokubonelela nge-laser yokucoca i-lens ebonakalayo kunye nesisombululo senkqubo. Kubandakanya iModyuli yeQBH, iGalvo Scanner, iilensi zeF-theta kunye neNkqubo yoLawulo. Sigxininise kwisicelo se-laser yemizi-mveliso ephezulu.
Imodeli yethu eqhelekileyo ye-Galvo Scanner yi-PSH10, PSH14, PSH20 kunye ne-PSH30.
PSH10 inguqulelo-Ukusetyenziswa kwe-laser yemizi-mveliso ephezulu, njengokumakishwa ngokuchanekileyo, ukusetyenzwa-kwi-fly, ukucoca, i-welding, i-tuning, i-scribing, i-additive production (ukuprintwa kwe-3D), i-microstructuring, ukusetyenzwa kwezinto, njl.
PSH14-H uhlobo lwamandla aphezulu-kumandla welaser ukusuka kwi-200W ukuya kwi-1KW(CW); ivalwe ngokupheleleyo intloko scan kunye nokupholisa amanzi; ilungele amandla elaser aphezulu, uthuli, okanye amathuba okucela umngeni kokusingqongileyo, umz. ukuvelisa okongeziweyo (ushicilelo lwe-3D), ukuwelda okuchanekileyo, njl.
PSH20-H uhlobo lwamandla aphezulu-kumandla welaser ukusuka kwi-300W ukuya kwi-3KW(CW); ivalwe ngokupheleleyo intloko scan kunye nokupholisa amanzi; ilungele amandla elaser aphezulu, uthuli, okanye amathuba okucela umngeni kokusingqongileyo, umz. ukuvelisa okongeziweyo (ushicilelo lwe-3D), ukuwelda okuchanekileyo, njl.
PSH30-H uhlobo lwamandla aphezulu-kumandla welaser ukusuka kwi-2KW ukuya kwi-6KW(CW); ivalwe ngokupheleleyo intloko scan kunye nokupholisa amanzi; ilungele amandla aphezulu e-laser, amaxesha aphantsi kakhulu akhukuliseka. Umzekelo welding laser.
1. Ukushisa okuphantsi kakhulu (≤3urad / ℃); Ngaphezulu kweeyure ze-8 zeXesha elide Offset Drift ≤30 urad
2. Isisombululo esiphezulu kakhulu kunye nokuphindaphinda; isisombululo≤1 urad; ukuphinda-phinda≤ 2 urad
3. Isantya esiphezulu kakhulu:
PSH10: 17m/s
PSH14: 15m/s
PSH20: 12m/s
PSH30: 9m/s
| Umzekelo | PSH10 | PSH14-H | PSH20-H | PSH30-H |
| Igalelo lamandla elaser (MAX.) | CW: 1000W @ ifayibha laser I-Pulsed: 150W @ fiber laser | CW: 1000W @ ifayibha laser I-Pulsed: 500W @ fiber laser | CW: 3000W @ ifayibha laser I-Pulsed: 1500W @ i-fiber laser | CW: 1000W @ ifayibha laser I-Pulsed: 150W @ fiber laser |
| Amanzi apholileyo/atywinwe intloko yokuskena | NO | Ewe | Ewe | Ewe |
| Umngxuma (mm) | 10 | 14 | 20 | 30 |
| Esebenzayo Scan engile | ±10° | ±10° | ±10° | ±10° |
| Imposiso yokuJonga umkhondo | 0.13 ms | 0.19 ms | 0.28ms | 0.45ms |
| Ixesha lokuPhendula ngeNyathelo(1% yesikali esipheleleyo) | ≤ 0.27 ms | ≤ 0.4 ms | ≤ 0.6 ms | ≤ 0.9 ms |
| Isantya esiqhelekileyo | ||||
| Ukuma / ukutsiba | < 157 m/s | < 15 m/s | < 12 m/s | < 9 m/s |
| Ukuskena komgca / ukuskena kweraster | < 12 m/s | < 10 m/s | < 7 m/s | < 4 m/s |
| Ukuskena kwevektha eqhelekileyo | < 5 m/s | < 4 m/s | < 3 m/s | < 2 m/s |
| Umgangatho wokuBhala oLungileyo | 900 cps | 700 cps | 450 cps | 260 cps |
| Umgangatho wokubhala ophezulu | 700 cps | 550 cps | 320 cps | 180 cps |
| Ukuchaneka | ||||
| Umgca | 99.9% | 99.9% | 99.9% | 99.9% |
| Isigqibo | ≤ 1 irad | ≤ 1 irad | ≤ 1 irad | ≤ 1 irad |
| Ukuphindaphinda | ≤ 2 irad | ≤ 2 irad | ≤ 2 irad | ≤ 2 irad |
| Ubushushu Ukuqhuba | ||||
| I-Offset Drift | ≤ 3 urad/℃ | ≤ 3 urad/℃ | ≤ 3 urad/℃ | ≤ 3 urad/℃ |
| Qver 8hours Ixesha elide Offset Drift (Emva kwe-15min isilumkiso) | ≤ 30 irad | ≤ 30 irad | ≤ 30 irad | ≤ 30 irad |
| Uluhlu lobushushu obusebenzayo | 25℃±10℃ | 25℃±10℃ | 25℃±10℃ | 25℃±10℃ |
| Ujongano loMqondiso | I-Analog: ± 10V Idijithali: XY2-100 protocol | I-Analog: ± 10V Idijithali: XY2-100 protocol | I-Analog: ± 10V Idijithali: XY2-100 protocol | I-Analog: ± 10V Idijithali: XY2-100 protocol |
| i-Input Power Requirement (DC) | ±15V@ 4A Max RMS | ±15V@ 4A Max RMS | ±15V@ 4A Max RMS | ±15V@ 4A Max RMS |
Phawula:
(1) Zonke ii-engile zikwizidanga zoomatshini.
(2) Ngenjongo ye-F-Theta f=163mm. Ixabiso lesantya liyahluka ngokuhambelanayo kunye nobude bojoliso obahlukeneyo.
(3) Ifonti yestroke enye enobude obuyi-1mm.
