I-optics yenkqubo ye-optical scanning enamandla: i-1pc i-lens encinci yokugxila, i-1-2pcs i-lens yokugxila, i-Galvo mirror.I-lens yonke ye-optical yakha umsebenzi wokwandisa umqadi, ukugxila kunye nokuphambuka kwe-beam kunye nokuskena.
Inxalenye ekhulayo yi-lens engalunganga, oko kukuthi, i-lens encinci yogxininiso, eqonda ukwanda kwe-boom kunye ne-zoom ehambayo, i-lens egxininisekile yenziwe liqela lelensi ezilungileyo. Isibuko segalvo sisibuko kwinkqubo yegalvanometer.
(1) Ukulungiswa koyilo lwe-lens: Umlinganiselo ophezulu wedayamitha ukuya kumlinganiselo wokutyeba
(2) I-Lens yomonakalo ophezulu umda:> 30J / cm2 10ns
(3) I-Ultra-low absorption coating, izinga lokufunxa:<20ppm
(4) Ubukhulu begalvanometer kumlinganiselo wedayamitha: 1:35
(5) Ukuchaneka komphezulu weLens:<= λ/5
Ilensi yasemva kweNjongo
| Ubukhulu boMfundi wokungena (mm) | I-Optics 1 Diameter(mm) | I-Optics 2 Diameter(mm) | I-Optics 3 Diameter(mm) | Indawo yokuskena (mm) | Umngxuma ocacileyo yeSkena (mm) | Ubude bamaza |
| 8 | 15 | 55 | 55 | 600x600 800x800 | 30 | 10.6um |
| 12 | 22 | 55 | 55 | 1600x1600 | 30 | |
| 8 | 16 | 55 | 55 | 600x600 800x800 | 30 | 1030-1090nm |
| 8 | 15 | 35 | 35 | 300x300 | 10 | 532nm |
| 8 | 15 | 35 | 35 | 300x300 | 10 | 355nm |
Isipili esiReflector
| Icandelo Inkcazo | Ububanzi (mm) | Ukutyeba(mm) | Izinto eziphathekayo | Ukwaleka |
| ISilicon Reflector | 25.4 | 3 | Isilicon | HR@10.6um,I-AOI: 45 ° |
| ISilicon Reflector | 30 | 4 | Isilicon | HR@10.6um,I-AOI: 45 ° |
| IFiber Reflector | 25.4 | 6.35 | I-silica edibeneyo | HR@1030-1090nm, AOI: 45 ° |
| IFiber Reflector | 30 | 5 | I-silica edibeneyo | HR@1030-1090nm, AOI: 45 ° |
| IFiber Reflector | 50 | 10 | I-silica edibeneyo | HR@1030-1090nm, AOI: 45 ° |
| 532 Isibonisi | 25.4 | 6 | I-silica edibeneyo | HR@515-540nm/532nm, AOI: 45 ° |
| 532 Isibonisi | 25.4 | 6.35 | I-silica edibeneyo | HR@515-540nm/532nm, AOI: 45 ° |
| 532 Isibonisi | 30 | 5 | I-silica edibeneyo | HR@515-540nm/532nm, AOI: 45 ° |
| 532 Isibonisi | 50 | 10 | I-silica edibeneyo | HR@515-540nm/532nm, AOI: 45 ° |
| 355 Isibonakalisi | 25.4 | 6 | I-silica edibeneyo | HR@355nm&433nm, AOI: 45° |
| 355 Isibonakalisi | 25.4 | 6.35 | I-silica edibeneyo | HR@355nm&433nm, AOI: 45° |
| 355 Isibonakalisi | 25.4 | 10 | I-silica edibeneyo | HR@355nm&433nm, AOI: 45° |
| 355 Isibonakalisi | 30 | 5 | I-silica edibeneyo | HR@355nm&433nm, AOI: 45° |
Isibuko saseGalvo
| Icandelo Inkcazo | Ubukhulu boMfundi wokungena (mm) | Izinto eziphathekayo | Ukwaleka | Ubude bamaza |
| 55mmL * 35mmW * 3.5mmT-X 62mmL * 43mmW * 3.5mmT-Y | 30 | Isilicon | MMR@10.6um | 10.6um |
| 55mmL * 35mmW * 3.5mmT-X 62mmL * 43mmW * 3.5mmT-Y | 30 | I-silica edibeneyo | HR@1030-1090nm | 1030-1090nm |
| 55mmL * 35mmW * 3.5mmT-X 62mmL * 43mmW * 3.5mmT-Y | 30 | I-silica edibeneyo | HR@532nm | 532nm |
| 55mmL * 35mmW * 3.5mmT-X 62mmL * 43mmW * 3.5mmT-Y | 30 | I-silica edibeneyo | HR@355nm | 355nm |
Ilensi ekhuselayo
| Ububanzi (mm) | Ukutyeba (mm) | Izinto eziphathekayo | Ukwaleka |
| 75 | 3 | ZnSe | AR/AR@10.6um |
| 80 | 3 | ZnSe | AR/AR@10.6um |
| 90 | 3 | ZnSe | AR/AR@10.6um |
| 90x60 | 5 | ZnSe | AR/AR@10.6um |
| 90x64 | 2.5 | ZnSe | AR/AR@10.6um |
| 90x70 | 3 | ZnSe | AR/AR@10.6um |
